Compression Molding Presses Include Slab Side
and Vacuum Shroud Models

Slab Side Vacuum Chamber Presses: 30 to 500 Ton CapacitiesSlab Side Vacuum Chamber Presses:
30 to 500 Ton Capacities

Vacuum chamber molding and laminating presses increase quality
and production

Compression molding or laminating on a press equipped with a vacuum chamber results in faster production, higher quality and reduced scrap parts. Surrounding the work piece with a vacuum removes heated gases and trapped air from the part, thereby eliminating defects.

Vacuum Shroud Compression Presses: 30 to 500 Ton CapacitiesVacuum Shroud Compression Presses:
30 to 500 Ton Capacities

Applications: Molding of rubber, silicone and composite materials, often over-molding inserts.

Integral vacuum shroud enhances molding quality and ensures cavity filling by eliminating trapped air. Press can be equipped to press inserts into place, as well as eject molded parts.

Follow Us

Wabash MPI

1569 Morris Street, P.O. Box 298
Wabash, IN 46992-0298 USA
Contact Us
Phone: 260-563-1184   |   Fax: 260-563-1396

Wabash strongly recommends the use of personal protection equipment when operating Wabash equipment. Wabash reserves the right to change specifications or other information without notice. Presses and accessories may differ from photos shown. Consult WABASH for information to special requirements your application may demand.