Wabash MPI Hydraulic Presses

© 2009 Wabash MPI

Wabash MPI, The leaders in compression molding equipment.

Transfer Molding Presses for Rubber, Silicon, Plastics and Composites

Genesis and Vantage Series Presses from Wabash MPI Provide Precision Parts and Superior Molding

Accurate production
of precision parts

WABASH transfer presses are used for superior molding of encapsulated electronics, medical products, insert molded plugs and connectors, rotors, sensors, and many other applications.

Beginning with a WABASH 30-ton Genesis Series or a 50 through 350-ton Vantage Series press, you can configure it to perform your precise task. Many options are available.

Standard features of these transfer molding presses include rigid four-post construction for accurate platen level and parallelism. Cartridge heated insulated steel platens provide precise temperature control of molds for quality results.

The transfer press features energy sufficient hydraulic system. A flow control valve provides adjustable transfer pressing speed. An optional mold safety circuit is available to protect expensive tooling from damage.

WABASH transfer presses are used for precise molding of encapsulated electronics, medical products, "O" rings, insert molded plugs and connectors, spark plugs, rotors, sensors, and many other applications.
Specs for ASTM PResses

Wabash reserves the right to change specifications without notice. Presses and accessories may differ from photos shown.

Wabash strongly recommends the use of a safety shield and personal protection equipment when operating Wabash equipment.

See list of additional optional features.


Optional Features of Genesis and Vantage Series
Transfer Molding Presses:

  • Linear position control
  • Work table
  • High speed hydraulic package
  • Air-cooled heat exchanger
  • WaterSaver valve for heat exchanger
  • Low pressure system
  • Clamp pressing speed control
  • Adjustable fast close control
  • Hydraulic part ejector
  • Digital display of clamp or transfer force
  • Electronic force control
  • Fused electrical disconnect
  • 7 day timer for heaters
  • Alternate safety guarding systems
  • Extra heat zones in platens
  • Audible or visual alarms
  • Temperature controller and plugs for mold heaters
  • Mold protection package
  • 220, 380 or 575 volt operation
  • Mold mounting holes in platen

Compression Molding Presses | Vacuum Molding Presses | Transfer Molding Presses
Electric Presses | ASTM Presses | Composite Presses | Floor Standing Laboratory Presses
Chillers | Special Application Presses | Contact Us | Sitemap | Home | Company Profile
News | Carver Benchtop Laboratory Presses


Wabash MPI
1569 Morris Street  ||  PO Box 298  || Wabash, IN 46992-0298 USA
Phone: 260-563-1184  || Fax: 260-563-1396